Wurth Car & Vehicle Decal Adhesive & Glue Remover 1L
Wurth Car & Vehicle Decal Adhesive & Glue Remover is excellent for large area application to remove the adhesive from wrap around decals, service vehicles and blue light industry vehicles such as police cars, ambulances, fire vehicles, fleet vehicles or any area where a large area of adhesive is required to be removed.
It also does not contain any CFC propellants, will not damage paintwork or plastics and can be applied to larger areas in minimal time.
Firstly the vehicle should be cleaned and allowed to dry. Heat the panel with an infrared lamp or hot air gun, it is important not to get the graphic to hot or over expose the substrate to infrared for long periods, this will make the graphic brittle. Lift one edge of the graphic with a plastic spatula and pull the outer layer away from the substrate, in some cases this may leave the white backing on the substrate of the vehicle.
Apply the Adhesive Remover by spraying on to the area and leave for 15 minutes, this allows the Adhesive Remover to penetrate in to the white backing and the Adhesive. Using a suitable plastic spatula at a 30 degree angle start from the top of the panel (example a door) scrape away the soft adhesive working across
Apply more Adhesive Remover and leave for about 10 to 15 minutes which will soften any remaining adhesive. Once all traces of glue has been removed from the substrate, use neat Traffic Film Remover on a cloth to remove any outline left.
1 x Wurth Car & Vehicle Decal Adhesive & Glue Remover 1L.